Radiant Heat Warmer  |  Neonatal Resuscitation Unit  |  Phototherapy Unit  |  Infant Care Trolley  |  Silicone Manual Resuscitator  |  Suction Unit  |  Oxygen Hood  |  Resuscitation Kit  |  Resuscitation Accessories
Infant Incubator




Incubator Mounted on Trolley with 3 Drawers and Double Walled Canopy
Model: INC1001 A / B


Specifications
  • Acrylic Doubled Wall Canopy with six port holes
  • Front Loading
  • Four Inlets for administration of O2, IV lines or Ventilator tubing.
  • Sliding Baby Tray with External jerk free gear based Head Up / Down facility
  • X-Ray cassette sliding facility.
  • Stainless Steel rust free Heater, blower sub assembly with changeable micro Air filters.
  • Provision of adequate Storage by 3 drawers and an open shelf.
  • Humidity heater and Hygrometer.
  • Pole for Syringe Pump / Infusion Pump & S.S. IV Stand


Incubator Mounted on Trolley with Single Walled Canopy
Model: 1002 A / B


Specifications
  • Acrylic Single Wall Canopy with six port holes
  • Front Loading
  • Four Inlets for administration of O2, IV lines or Ventilator tubing.
  • Sliding Baby Tray with External jerk free gear based Head Up / Down facility
  • X-Ray cassette sliding facility.
  • Stainless Steel rust free Heater, blower sub assembly with changeable micro Air filters.
  • Provision of an open shelf in the trolley.
  • Humidity heater and Hygrometer.
  • Pole for Syringe Pump / Infusion Pump & S.S. IV Stand


Transport Incubator Mounted on Detachable Trolley
Model: 1003


Basic Portable Incubator mounted on trolley along with Saperate Inverter system. Operated on 230 V, AC or External battery ( ambulance battery or 12V30 AH Dry cell )

Can also use in NICU for routine baby care.

Specifications
  • Portable Incubator mounted on trolley with shelves
  • Acrylic Canopy with front and side opening with elbow operated port holes
  • Inlets for administration of O2, IV lines or Ventilator tubing
  • Side pull - out sliding Baby Tray from Left side of canopy to facilitate resuscitation of baby during transport



Temperature Controller A

  • Big red LED display for skin and air temperature
  • LED indicator for selected mode
  • LCD for alarm messages, selected mode, timer display, heater power (%), etc
  • Integrated timer - 1 to 59 min, with count-up and count-down feature
  • Temperature range - skin: 34 to 38 Degrees Celcius (user pre-settable) air: room temperature to 39 Degrees Celcius
  • Monitoring of skin temperature by means of sensor, range: 30 to 42 Degrees Celcius
  • Heater output - 0 to 100% in increments of 5%
  • Control unit - Auto over-temperature cut-off with audio-visual alarms according to pre-set temperature to avoiding overheating
  • Display indicates system errors, sensor failure, alarm and visual message on LCD for high/low, over/under temperature for skin and air, heater failure, power control device failure
  • Audio-Visual alarm for power failure
  • Audio-Visual alarm for Fan Fail
Temperature Controller B

  • Big red LED display for skin and air temperature
  • Big red LED display for skin temperature, set temperature & timer
  • LED indicator for selected mode& alarm
  • Bar-graph for heater power
  • Integrated timer - 1 to 09 min with count-up feature
  • Temperature range - skin: 34 to 38 Degrees Celcius (user pre-settable)
  • Monitoring of skin temperature by means of sensor, range: 30 to 42 Degrees Celcius
  • Control unit - auto over-temperature cut-off with audio-visual alarms according to pre-set temperature to avoiding overheating
  • Display indicates system errors, sensor failure, alarm for high/low, over/under temperature for skin, heater failure, power control device failure
  • Audio-Visual alarm for power failure




Zeal Medical  © 2012Website Powered by innovativepix